Centrifugal Peeler SHCO-1


Quick Overview

Centrifugal Peeler SHCO-1 is designed for oats peeling . Can be used on groats mills and compound feed factories.

Centrifugal Peeler SHCO-1 operates as follows. Grain that is to be processed moves from the operational grain tank of the technological line through the opening of the valves into the gravity flow of the working chamber. Further, the grain enters the hammer disc and then it is processed by the centrifugal forces. Due to the intense clash of grains against the shellring the grain is separated from the shells.



Centrifugal Peeler SHCO-1Centrifugal Peeler SHCO-1
Click to enlarge
  • Centrifugal Peeler ШЦО-1
  • Centrifugal Peeler ШЦО-1
  • Центробежный шелушитель ШЦО-1

Purpose and Scope:
Centrifugal Peeler SHCO-1-1 is designed for oats peeling . Can be used on groats mills and compound feed factories.

Description:
Centrifugal Peeler SHCO-1 operates as follows. Grain that is to be processed moves from the operational grain tank of the technological line through the opening of the valves into the gravity flow of the working chamber. Further, the grain enters the hammer disc and then it is processed by the centrifugal forces. Due to the intense clash of grains against the shellring the grain is separated from the shells.

The important advantage of the centrifugal peeler SHCO-1 is the fact that the shell ring has its own drive, thanks to which it moves to the side opposite to the disk movement. In such way the effectiveness of hulling process is increasing, and the service life of the shell ring is extending.

After the working chamber grain enters outlet funnel, where with the help of the aspiration it is blown by the air. Processed in this way grain enters the staff workshop communication of the pneumatic or gravity transport for the following operations according to the technological scheme of the workshop.


Model ШЦО-1
Capacity up to, kg/h  3000
Rotor drive power, kW  5,5
Feedwell drive power, kW  0,37
Aspiration air consumption, m3/h 1000
Rotor speed, rev/min 1000
Weight, kg  150
 Overal dimensions, mm:
Length 
Width
Height

600
600
1200

1. The shell ring has its own drive, thanks to which it moves to the side opposite to the disk movement. In such way the effectiveness of hulling process is increasing, and the service life of the shell ring is extending.
2. Convenient, easy and precise product supply adjustment into the hulling chamber


Меню