Chizhov Machine ПЧМЦ


Quick Overview

Chizhov modernized digital machine ПЧМЦ is designed to:
-Test the food samples moisture with automatic machine plates’ temperature control;
-Monitor the food raw material, semi-finished and finished products humidity.
     The general machine operation principle consists in the raw material dehydration by evaporation due to the sample heating at a desired temperature for a predetermined time. The samples dehydration is carried out in special packages. Bags are made of thinly glued paper mimeography or newspaper type. The machine is used in the food industry laboratories (bakery, confectionery, dairy, meat processing, etc.).


Chizhov Machine ПЧМЦChizhov Machine ПЧМЦ
Click to enlarge
  • Chizhov Machine ПЧМЦ
  • Chizhov Machine ПЧМЦ
  • Chizhov Machine ПЧМЦ

LLC "OLIS" is the manufacturer of the Chizhov machine, the modernized digital ПЧМЦ.

Purpose and scope:

Chizhov modernized digital machine ПЧМЦ is designed to:
-Test the food samples moisture with automatic machine plates’ temperature control;
-Monitor the food raw material, semi-finished and finished products humidity.

The general machine operation principle consists in the raw material dehydration by evaporation due to the sample heating at a desired temperature for a predetermined time. The samples dehydration is carried out in special packages. Bags are made of thinly glued paper mimeography or newspaper type. The machine is used in the food industry laboratories (bakery, confectionery, dairy, meat processing, etc.).

Description:

The product consists of a dried sample, electronic monitoring and control unit. Drying unit consists of an upper and lower heating plates interconnected by a loop. Upper unit can be opened with a handle in order to lay the samples package. Structurally, each heating unit is an aluminum plate with an electrical heating element fixed therein. Heating units are covered with lids.

The electronic control center consists of the regulation and temperature control and exposure time initialization center. It is used to set and automatically maintain the desired temperature, as well as for visual inspection of the drying samples unit temperature. Digital indicator allows to control the current temperature unit up to the 0,1 ºC at 1 ºC to 100 ºC and 1 ºC at a temperature of 100 ºC to 199 ºC. To control the samples’ drying time there is a timer that allows you to set the delay time from 1 minute to 99 minutes, or switch to a shut off mode.

Electronic unit automatically heats the plates and maintains the drying point.

The timer should be set immediately after the laying of the sample materials package between the drying unit plates.

During operation the temperature sensor produces a signal that is proportional to the temperature of the drying unit plates. Electronic unit processes the sensor signal in order to display actual plates’ temperature and to generate signals switching electric heaters. Digital display allows you to monitor the current drying samples unit temperature.

Model
ПЧМЦ
Drying temperature setting range, º C
 from + 50 to + 199
Temperature discretisation, ºС
0,1
Set working temperature and the drying
unit plates temperature deviation, ºС
±2
Samples’ drying unit till the working temperature
sets heating time no more than, min
20
The gap between the contacting
working plates’ surfaces, mm
 no more then 0,1
Power supply single phase alternating current
Voltage, V
Frequency, Hz
Power consumption, W
 
220
50
700
The range of set drying time values, min
1 - 99
Drying time set values discrepancy, min
1
Overall dimensions, no more than
 
Drying unit
210х120
Control unit
175х120х65
Weight, kg
 
Drying unit
6,0
Control unit
0,8

1. Quick operating mode access;
2. Blocking in case of machine overheating;
3. High degree of temperature stability due to the electronic thermostat;
4. Insulated drying unit;
5. Increased electrical safety;
6. Easy to use;
7. Ease of maintenance.


Меню