TECHNOLOGIES AND EQUIPMENT
FOR GRAIN PROCESSING

Device pH-150 MI


Quick Overview

Device pH-150 MI is designed for measuring рН-value of oxidation-reduction potential Eh and temperature of water solutions in technological solutions, natural and waste water.

Device pH-150 MI is designed for measuring рН-value of oxidation-reduction potential Eh and temperature of water solutions in technological solutions, natural and waste water.

  • All required for carrying out measurements - including the combination electrode and stand rod, complete with a turntable - is coming with the device.
  • The device allows determining the exact coordinate value of the isopotential point of the electrode system in use.
  • The device allows memory- saving of 30 measuring results, specified by the operator, as well as 'freezing' the current reading on the display.
Model рН-150 MI
Measurement range:
рН
mV

from 0,00 to +14,00
from -2000,0 to +2000,0
Temperature from -10,0 to +100,0 °С
Major error of the transducer:
рН
temperature

±0,05
±2 °С
Discreteness:
рН
mV
temperature

0,01
1
1 °С
Automatic temperature compensation in the range from -10 to +100 °С
Power supply or autonomous 20V, 50Hz
6V (1,5Вх4), 4 elements А316
  • In the microprocessor device has no mechanical controls, which excludes the possibility of accidental failure of the settings;
  • It automatically recognizes the values ​​of the standard calibration solutions used;
  • The pH meter is made in a dust-proof framework, which allows being used in the field;
  • The device uses a multifunctional LCD display, which is well read and does not tire the eyesight;
  • PH-150 MI is easy to operate, works in interactive mode with the use of prompts to the operator;
  • Operative self-diagnosis is used;
  • Using a standard temperature sensor does not require the adjustment of the device for measuring the temperature as well as the electrode temperature compensation.
Меню