Liter Purk PH-2


Quick Overview

     Liter Purk with falling load PH-2 is designed to determine the nature of grain (grain weight per liter). It is used in laboratories, processing enterprises, research organizations, etc. 
     Purk consists of the following main components: a table, measurement, filler, filling the cylinder, falling weight, the knife. To work with Purk necessary electronic scales up to 3 kg of 4-th class. The table serves as a basis for assembling Purk to work. Merck is a cylindrical cup with a central bottom hole. At the top of the measurements there is a gap for a knife. The bar is set in the flange table. Filling is made in the form of a hollow cylinder with a groove on the ends. This allows you to set the filling tightly in his measure. Filling the cylinder is installed on the filler. Filling the cylinder has at one end cut window. Here inside the cylinder is mounted hopper with gate and lock. The falling weight is made in the form of a cylinder with a circular recess. The knife is made of stainless steel sheet is cut in a right angle. If the falling weight is on the bottom of the measurements, and push the knife into the crack measurements, the volume measurements between upper and lower plane cargo plane knife is strictly one liter.


Liter Purk PH-2Liter Purk PH-2
Click to enlarge
  • Liter Purk PH-2
  • Liter Purk PH-2
  • Liter Purk PH-2
  • Liter Purk PH-2

     Purpose and scope:
     Liter Purk with falling load PH-2 is designed to determine the nature of grain (grain weight per liter). It is used in laboratories, processing enterprises, research organizations, etc.

     Description:
     Purk consists of the following main components: a table, measurement, filler, filling the cylinder, falling weight, the knife. To work with Purk necessary electronic scales up to 3 kg of 4-th class. The table serves as a basis for assembling Purk to work. Merck is a cylindrical cup with a central bottom hole. At the top of the measurements there is a gap for a knife. The bar is set in the flange table. Filling is made in the form of a hollow cylinder with a groove on the ends. This allows you to set the filling tightly in his measure. Filling the cylinder is installed on the filler. Filling the cylinder has at one end cut window. Here inside the cylinder is mounted hopper with gate and lock. The falling weight is made in the form of a cylinder with a circular recess. The knife is made of stainless steel sheet is cut in a right angle. If the falling weight is on the bottom of the measurements, and push the knife into the crack measurements, the volume measurements between upper and lower plane cargo plane knife is strictly one liter.

Model PH-2
The error indications, g, not more +4
Variation of the six dimensions, g, max 2,10
Dimensions, mm:  
in working order 450x300x860
in transport condition 450x300x200
Weight, kg 11

1. Time of measurement is shortened due to 4 grade electronic scales up to 3 kg. Electronic scales are not included in the complete set and can be ordered separately. Recommended brands of scales: ТВЕ-3-0,1;
2. Compact plywood packing box provides easy transportation and storage;
3. "Program and procedure of the state metrological certification no. 866-36-09" and "Procedure of verification no. 867-36-09" have been developed;
4. Easy to install and operate;
5. Modern design.

Меню