Tubes dryer SP-1


Quick Overview

Tubes dryer SP-1 is designed for drying of laboratory tubes after water rinsing.

Purpose:
  Tubes dryer SP-1 is designed for drying of laboratory tubes after water rinsing.

Method of procedure:

Tubes drying is performed by a flow of warm air supplied from the thermo-ventilation device, through the pin slots on which the tubes shall be put on. Tubes dryer SP-1 allows simultaneous drying of up to 16 tubes. The dryer is easy to operate; the air temperature is controlled due to the indication of the digital display. Tubes dryer SP-1 is not a means of measuring equipment and is not subject to calibration testing.

Параметры СП-1
Диапазон установки предельных температур +40...+60 °C
Время сушения пробирок, не более  15 мин
Количество мест для пробирок         16
Питание выносного блока сушилки  220 В, 50 Гц
Питание сушилки 36 В
Потребляемая мощность, не более 80 ВА
Габаритные размеры, не более 300х420х340 мм
Масса, не более 3 кг
Время непрерывной работы 8 часов
Диапазон рабочих температур +10...+35 °C
Меню