Wild oat indented cylinder TCO


Quick Overview

   Wild oat indented cylinder TCO is designed for main crop grain cleaning from long wild oat impurity. It’s also used for grain sorting by the length.
   Wild oat indented cylinders TCO are used in grain elevators, mills and groats mills for  separating wild oat seeds from grain mixtures; at groat mills – for separating oats from barley and separating  dehusked and undehusked grain; and also at seed cleaning plants and at plants on corn seeds calibration for separation of the largest grains from the mixture.



     Purpose:
     Wild oat indented cylinder TCO is designed for main crop grain cleaning from long wild oat impurity. It’s also used for grain sorting by the length.

     Field of application:
     Wild oat indented cylinders TCO are used in grain elevators, mills and groats mills for  separating wild oat seeds from grain mixtures; at groat mills – for separating oats from barley and separating  dehusked and undehusked grain; and also at seed cleaning plants and at plants on corn seeds calibration for separation of the largest grains from the mixture.

     Work description:
     Main working part of trieur wild oat separator is a cylinder with cells where bruchid weevil of short fraction (grain) comes, but bruchid weevil of long fraction (wild oat) is bigger than the cell size and isn't captured by the cell. A cell cylinder is turned on and throws up bruchid weevil of long fraction to the first tray, and bruchid weevil of short fraction – to the second tray, in this way fractionation of the mixture is made.

Model TCO-500 TCO-700
Capacity, up to, kg/h 1900 4000
Cleaning efficiency, not less, % 80 80
Installed capacity, kW 0,75 1,1
Power supply characteristics:
Voltage, V
Frequency, Hz

380
50

380
50
Air flow rate, m3/h 300 600
Aerodynamic resistance, P 400 400
Overall dimensions, mm
length
width
height

2800
1100
1400

4000
1200
1650
Weight, no more, kg 600 900

1. The machine can be installed as a separate equipment and also two separators can be set one above the other, making an indented cylinder with  consecutive and parallel motion of the mixture.

2. The working cylinder is automatically put into the setup mode with the angle 2º, which improves machine work, providing equitability of the mixture along the working cylinder;

3. Adjustment of sectional spout is provided in the range of 0-90º, that allows to separate the mixture with maximum efficiency;

4. The components of the leading European manufactures are used.

Меню