Aggregate universal groats shop "OPTIMATIK-K-07"


Quick Overview

Aggregate universal groats shop "OPTIMATIK-K-07" is designed for the wheat, barley, peas, corn and millet grains processing into wheat, barley, pearl barley, pea, corn and wheat groats. The construction and equipping of groats shop provides a yield and quality of cereals not lower than the requirements of existing standards, that allows to confidently meet the demands of today's market.

      Specifications and description: Aggregate universal groats shop "OPTIMATIK-K-07" is designed for the wheat, barley, peas, corn and millet grains processing into wheat, barley, pearl barley, pea, corn and wheat groats. The construction and equipping of groats shop provides a yield and quality of cereals not lower than the requirements of existing standards, that allows to confidently meet the demands of today's market.

    Aggregate universal groats shop "OPTIMATIK-K-07" is supplied with a carrying iron, stairs and service platforms, hoppers, aspiration system, pneumatic system, electrical part and automation. As during the manufacture groats shop passes control assembly stage, its complete assembly and commissioning takes no more than three days. At the same time the need for cutting, welding and metal drilling on place is completely excluded.

Range, the output and productivity: 

Name cereals Actual
output,
%
Exit on
GOST,
%
Productivity
kg/h
(grains)
Pearl barley, quantity 65-70 45 200
Fine-ground barley, 3 numbered 70-74 65 350
Wheat grain polished, guantity 80-85 63 400
Crushed wheat grain, 3 numbered 67-73 60 450
Peas polished whole and split 77-82 77 400
Peas polished split 65-70 None 400
Corn grits *
Corn flour
50-55
12-15
40
12
350
Millet polished varietal ** 60-65 60 300


Exit cereals listed in the compliance of its quality is not below the requirements set by GOST. 
Changing the output of cereals in these ranges depends on the quality of the processed grain.
*- In the processing of corn and half-odontoid siliceous varieties of cereal grains condition possible is a fine for the production of extruded rods,
**- Grade wheat is determined by the class of processed millet.

Model OPTIMATIK-K-07
Installed capacity, kW 16
The average consumption of electricity per ton of processed grain, kW 26
Service personnel, persons 1
Area to accommodate and maintenance of equipment, m2  17
Required ceiling height up to, m 5
Power  3-phase
alternating current,
 380Vt, 50HZ
Dimensions, mm:
Width
Length
Height

2500
3000
4850
The main indoors transport pneumatic
The degree of automation semiautomatic,
management
- from a central console


Composition of grain manufactory:

1. Block peeling and chopping of 1 pcs.
1.1. Magnetic column MK-1 2 pcs.
1.2. Silo Operations 1 pcs.
1.3. Shelling-grinder Cascade-0,4  1 pcs.
1.4. Chopper DCM-0,4 1 pcs.
2. Block fractionation and finished products in the 1 pcs.
2.1. Sifter BM-0,8 1 pcs.
2.2. Aspiration column AK-100 3 pcs.
2.3. Bunker finished products 5 pcs.
2.4. Device of  beat 5 pcs.
3. The system of aspiration and pneumatic Kit
4. Electrical and Automation Kit
5. Bearing metal Kit

1. High finished product output;
2. Low power consumption;
3. Compact design;
4. Pneumatic conveying system used for product transporting on the production line provides convenience and small size of grain manufactories and improves the reliability of the equipment;
5. Partial automation allows a grain manufactory to be operated by one person;
6. Grain cleaning from large, small, light and metal foreign matters;
7. Finished product has a cut form with sharp edges. No flattened and torn cereal;
8. Components from leading European manufacturers;
9. Additional options can be easily installed to the basic design that significantly increase processing capacity;
10. High quality of finished product makes it easy to win in the competition for the consumer.

Меню