TECHNOLOGIES AND EQUIPMENT
FOR GRAIN PROCESSING
многоканальный +38 (048) 752-85-58
отдел “Оборудование для очистки и переработки зерна”
+38 (067) 511-29-99,
+38 (067) 485-19-95
отдел “Лабораторное оборудование”
+38 (067) 899-47-97
отдел Экспорта оборудования
+38 (068) 939-65-85
отдел Сервиса
+38 (096) 714-46-61
Universal grain workshop OPTIMATIK-K-15
Universal grain workshop OPTIMATIK K-15 is designed for wheat, barley, peas, corn and millet processing into groats. Equipment of the grain workshop allows to provide groats quality higher than GOST requirements and to satisfy demands of modern market.
Specifications and description: Universal grain workshop OPTIMATIK K-15 is designed for wheat, barley, peas, corn and millet processing into groats. Equipment of the grain workshop allows to provide groats quality higher than GOST requirements and to satisfy demands of modern market.
Range, output and productivity:
Name of the groats |
The actual
yield, |
Yield according
to GOST,%
|
Productivity, kg/h (for the grain) |
Pearl barley, of the 1st type |
65-70 | 45 | 400 |
Fine-ground barley, of the 3d type |
70-74 | 65 | 700 |
Wheat grinded of the1st type | 80-85 | 63 | 700 |
Wheat crushed of the 3d type | 69-73 | 60 | 800 |
Peas grinded whole and split |
77-82 | 77 | 700 |
Peas grinded and crushed as halves | 65-70 | None | 700 |
Corn groats*
flour |
50-55 12-15 |
40 12 |
600 |
Millet grinded varietal ** | 60-65 | 60 | 400 |
The groats yield is specified in the compliance of its quality not below the requirements set by GOST.
Changing of the groats yield in these ranges depends on the quality of the processed grain.
*- output of small groats for the production of corn curls by extrusion is possible when processing corn of halfodontoid and hard grades of basic condition,
**- wheat grade is determined by the class of processed millet.
Model | OPTIMATIK-K-15 |
Installed power, kW | 30 |
The average consumption of electricity per ton of processed grain, kW | 26 |
Service personnel, persons | 1 |
Area to accommodate and maintenance of equipment, m2 | 17 |
Required ceiling height up to, m | 5,5 |
Power | 3-phase alternating current, 380Vt, 50HZ |
Dimensions, mm: Width Length Height |
2800 3000 5300 |
The main indoors transport | pneumatic |
The degree of automation | semiautomatic, management - from a central console |
Composition of grain manufactory:
1. | Block peeling and chopping of | 1 pcs. |
1.1. | Silo Operations | 1 pcs. |
1.2. | Shelling-grinder Cascade-0,6 | 1 pcs. |
1.3. | Chopper DCM-0,8 | 1 pcs. |
1.4. | Magnetic column MK-1 |
2 pcs. |
2. | Block fractionation of | 1 pcs. |
2.1. | Sifter BM-1,2 | 1 pcs. |
2.2. | Aspiration column AK-200 | 4 pcs. |
2.3. | Bunker finished products | 5 pcs. |
2.4. | Device of beat | 5 pcs. |
3. | The system of aspiration and pneumatic | Kit |
4. | Electrical and Automation | Kit |
5. | Bearing metal | Kit |
Grain manufactory may be additionally equipped with a purification unit: Number of 1pc. comprising:
1. | Silo Operations | 1 pcs. |
2. | Dispensing unit | 1 pcs. |
3. | Magnetic column MK-1 | 1 pcs. |
4. | Sieve-air separator SHS-3 | 1 pcs. |
5. | Aspiration system |
1 pcs. |
1. High finished product output;
2. Low power consumption;
3. Compact design;
4. Pneumatic conveying system used for product transporting on the production line provides convenience and small size of grain manufactories and improves the reliability of the equipment;
5. Partial automation allows a grain manufactory to be operated by one person;
6. Grain cleaning from large, small, light and metal foreign matters;
7. Finished product has a cut form with sharp edges. No flattened and torn cereal;
8. Components from leading European manufacturers;
9. Additional options can be easily installed to the basic design that significantly increase processing capacity;
10. High quality of finished product makes it easy to win in the competition for the consumer.